# Free Online Convert Between Milligram per Liter (mg/L) & Parts per million (ppm)

## Convert from mg/L to ppm | Convert from ppm to mg/L

Convert between Milligram per Liter (mg/L) and Parts per million (ppm) instantly with our free online unit calculator. You can easily convert both mg/L to ppm and ppm to mg/L with just a few clicks. To switch between the two conversions, simply use the swap icon (rotating arrows). If you need to start over, you can reset the values by clicking the reset button.

mg/L
ppm

Result: Milligram per Liter = Parts per million

i.e. mg/L = ppm

Article Contents []

### What does Milligram per Liter mean?

A milligram per Litre is a unit of density.

In this unit converter website, we have converter from Milligram per Liter (mg/L) to some other Density unit.

### What does Parts per million mean?

Parts per million (ppm) is a common unit of measurement used to express very low concentrations of substances in various mediums. One ppm is equivalent to one part of a substance per one million parts of the medium in which it is present.

For example, if there are 10 ppm of a certain chemical in a solution, it means that there are 10 parts of the chemical for every million parts of the solution. This unit is often used to express the concentration of pollutants in air, water, and soil.

PPM is an important measurement in a wide range of fields, including environmental science, chemistry, and engineering. In environmental science, it is used to measure the concentration of pollutants in air and water. In chemistry, it is used to express the purity of a substance, while in engineering it is used to describe the precision of manufacturing processes.

To calculate ppm, the amount of the substance being measured is divided by the total amount of the medium and multiplied by 1 million. For example, if you have a solution that contains 50 milligrams of a certain chemical in 1 liter of water, the concentration of the chemical in ppm can be calculated as follows:

(50 mg / 1 L) x 1,000,000 = 50,000 ppm

PPM is a small unit of measurement, and concentrations in ppm are often expressed in scientific notation or with a prefix, such as micrograms per liter (μg/L) or milligrams per cubic meter (mg/m³).

It is important to note that ppm is a relative measurement and not an absolute measurement. The accuracy of the measurement is dependent on the accuracy of the instruments used to measure both the substance being analyzed and the medium in which it is present.

In summary, ppm is a useful unit of measurement for expressing very low concentrations of substances in various mediums. It is widely used in environmental science, chemistry, and engineering, and is calculated by dividing the amount of the substance being measured by the total amount of the medium and multiplying by 1 million.

In this unit converter website, we have converter from Parts per million (ppm) to some other Density unit.

### What does Density mean?

Density is a very important parameter. The density of a substance can be defined as its weight per unit volume. It is also known as unit weight.

The following Density related conversions are available in our website:

### How to convert Milligram per Liter to Parts per million : Detailed Description

Milligram per Liter (mg/L) and Parts per million (ppm) are both units of Density. On this page, we provide a handy tool for converting between mg/L and ppm. To perform the conversion from mg/L to ppm, follow these two simple steps:

Steps to solve

Have you ever needed to or wanted to convert Milligram per Liter to Parts per million for anything? It's not hard at all:

Step 1

• Find out how many Parts per million are in one Milligram per Liter. The conversion factor is 1.0 ppm per mg/L.

Step 2

• Let's illustrate with an example. If you want to convert 10 Milligram per Liter to Parts per million, follow this formula: 10 mg/L x 1.0 ppm per mg/L = ppm. So, 10 mg/L is equal to ppm.
• To convert any mg/L measurement to ppm, use this formula: mg/L = ppm x 1.0. The Density in Milligram per Liter is equal to the Parts per million multiplied by 1.0. With these simple steps, you can easily and accurately convert Density measurements between mg/L and ppm using our tool at PyronConverter.com.

FAQ regarding the conversion between mg/L and ppm

Question: How many Parts per million are there in 1 Milligram per Liter ?

Answer: There are 1.0 Parts per million in 1 Milligram per Liter. To convert from mg/L to ppm, multiply your figure by 1.0 (or divide by 1.0).

Question: How many Milligram per Liter are there in 1 ppm ?

Answer: There are 1.0 Milligram per Liter in 1 Parts per million. To convert from ppm to mg/L, multiply your figure by 1.0 (or divide by 1.0).

Question: What is 1 mg/L equal to in ppm ?

Answer: 1 mg/L (Milligram per Liter) is equal to 1.0 in ppm (Parts per million).

Question: What is the difference between mg/L and ppm ?

Answer: 1 mg/L is equal to 1.0 in ppm. To calculate mg/L from ppm, you only need to divide the ppm Density value by 1.0.

Question: What does 5 mg/L mean ?

Answer: As one mg/L (Milligram per Liter) equals 1.0 ppm, therefore, 5 mg/L means ppm of Density.

Question: How do you convert the mg/L to ppm ?

Answer: If we multiply the mg/L value by 1.0, we will get the ppm amount i.e; 1 mg/L = 1.0 ppm.

Question: How much ppm is the mg/L ?

Answer: 1 Milligram per Liter equals 1.0 ppm i.e; 1 Milligram per Liter = 1.0 ppm.

Question: Are mg/L and ppm the same ?

Question: How many mg/L is one ppm ?

Answer: One ppm equals 1.0 mg/L i.e. 1 ppm = 1.0 mg/L.

Question: How do you convert ppm to mg/L ?

Answer: If we multiply the ppm value by 1.0, we will get the mg/L amount i.e; 1 ppm = 1.0 Milligram per Liter.

Question: What is the ppm value of one Milligram per Liter ?

Answer: 1 Milligram per Liter to ppm = 1.0.

#### Common Milligram per Liter to Parts per million conversion

mg/L ppm Description
0.1 mg/L 0.1 ppm 0.1 mg/L to ppm = 0.1
0.2 mg/L 0.2 ppm 0.2 mg/L to ppm = 0.2
0.3 mg/L 0.3 ppm 0.3 mg/L to ppm = 0.3
0.4 mg/L 0.4 ppm 0.4 mg/L to ppm = 0.4
0.5 mg/L 0.5 ppm 0.5 mg/L to ppm = 0.5
0.6 mg/L 0.6 ppm 0.6 mg/L to ppm = 0.6
0.7 mg/L 0.7 ppm 0.7 mg/L to ppm = 0.7
0.8 mg/L 0.8 ppm 0.8 mg/L to ppm = 0.8
0.9 mg/L 0.9 ppm 0.9 mg/L to ppm = 0.9
1 mg/L 1.0 ppm 1 mg/L to ppm = 1.0
2 mg/L 2.0 ppm 2 mg/L to ppm = 2.0
3 mg/L 3.0 ppm 3 mg/L to ppm = 3.0
4 mg/L 4.0 ppm 4 mg/L to ppm = 4.0
5 mg/L 5.0 ppm 5 mg/L to ppm = 5.0
6 mg/L 6.0 ppm 6 mg/L to ppm = 6.0
7 mg/L 7.0 ppm 7 mg/L to ppm = 7.0
8 mg/L 8.0 ppm 8 mg/L to ppm = 8.0
9 mg/L 9.0 ppm 9 mg/L to ppm = 9.0
10 mg/L 10.0 ppm 10 mg/L to ppm = 10.0
20 mg/L 20.0 ppm 20 mg/L to ppm = 20.0
30 mg/L 30.0 ppm 30 mg/L to ppm = 30.0
40 mg/L 40.0 ppm 40 mg/L to ppm = 40.0
50 mg/L 50.0 ppm 50 mg/L to ppm = 50.0
60 mg/L 60.0 ppm 60 mg/L to ppm = 60.0
70 mg/L 70.0 ppm 70 mg/L to ppm = 70.0
80 mg/L 80.0 ppm 80 mg/L to ppm = 80.0
90 mg/L 90.0 ppm 90 mg/L to ppm = 90.0

#### Common Parts per million to Milligram per Liter conversion

ppm mg/L Description
0.1 ppm 0.1 mg/L 0.1 ppm to mg/L = 0.1
0.2 ppm 0.2 mg/L 0.2 ppm to mg/L = 0.2
0.3 ppm 0.3 mg/L 0.3 ppm to mg/L = 0.3
0.4 ppm 0.4 mg/L 0.4 ppm to mg/L = 0.4
0.5 ppm 0.5 mg/L 0.5 ppm to mg/L = 0.5
0.6 ppm 0.6 mg/L 0.6 ppm to mg/L = 0.6
0.7 ppm 0.7 mg/L 0.7 ppm to mg/L = 0.7
0.8 ppm 0.8 mg/L 0.8 ppm to mg/L = 0.8
0.9 ppm 0.9 mg/L 0.9 ppm to mg/L = 0.9
1 ppm 1.0 mg/L 1 ppm to mg/L = 1.0
2 ppm 2.0 mg/L 2 ppm to mg/L = 2.0
3 ppm 3.0 mg/L 3 ppm to mg/L = 3.0
4 ppm 4.0 mg/L 4 ppm to mg/L = 4.0
5 ppm 5.0 mg/L 5 ppm to mg/L = 5.0
6 ppm 6.0 mg/L 6 ppm to mg/L = 6.0
7 ppm 7.0 mg/L 7 ppm to mg/L = 7.0
8 ppm 8.0 mg/L 8 ppm to mg/L = 8.0
9 ppm 9.0 mg/L 9 ppm to mg/L = 9.0
10 ppm 10.0 mg/L 10 ppm to mg/L = 10.0
20 ppm 20.0 mg/L 20 ppm to mg/L = 20.0
30 ppm 30.0 mg/L 30 ppm to mg/L = 30.0
40 ppm 40.0 mg/L 40 ppm to mg/L = 40.0
50 ppm 50.0 mg/L 50 ppm to mg/L = 50.0
60 ppm 60.0 mg/L 60 ppm to mg/L = 60.0
70 ppm 70.0 mg/L 70 ppm to mg/L = 70.0
80 ppm 80.0 mg/L 80 ppm to mg/L = 80.0
90 ppm 90.0 mg/L 90 ppm to mg/L = 90.0